





NICECNC-DE
Reusable high-performance air filter for GAS GAS ES/SM 700 2022-2025
15 % Rabatt ab 2 Teilen, Code:MX15 Code kopieren
18 % Rabatt ab 3 Teilen, Code:MX18 Code kopieren
Choose options
Give your KTM throttle and let it breathe with the high-performance air filter. Unlike OEM filters, our filter maximizes the airflow surface and delivers peak performance for your KTM on every track adventure.
Features:
- 【Durable Performance】Air filters are durable and represent a better investment for your vehicle. They can last the entire lifespan of the vehicle.
- 【Improved Performance】Properly maintained air filters can enhance performance and fuel efficiency.
- 【Reusable Filters】You don’t need to buy new filters every time. Simply clean and re-oil them, and your engine stays in good condition. This saves you money on purchasing new filters.
- 【Better Filtration/Airflow】Air filters use cotton/oil to ensure better filtration and airflow. Regular cleaning and re-oiling not only improve performance but also provide better engine filtration.
- 【Fuel Consumption】Improved airflow leads to better fuel consumption. More airflow into the engine reduces fuel consumption and saves you money at the pump.
- 【Performance Boost】Increases vehicle performance by 1-4%. The filter enhances overall power and torque, although the lower percentage may not be easily noticeable.
- 【Washable】Easy to maintain. With a filter oil kit and cleaning products, you can easily clean and re-oil the filter, making it cost-effective.
- 【Extended Engine Life】Air filters have larger pores or gaps between filter fibers, allowing more air to flow through and cool the engine, thereby extending its lifespan.
- 【Innovative Design】Uses a layered design of oiled cotton media, providing more airflow compared to traditional paper filters.
- 【Easy Installation】Air filters are designed to fit seamlessly into the factory airbox, and with the right tools, installation is a breeze.
Package Includes:
1 x High-flow air filter
Fits:
- For Air Filters:
KTM 690 Enduro 2008-2009
KTM 690 Enduro R 2009-2025
KTM 690 SMC 2007-2011
KTM 690 SMC R 2012-2024
Husqvarna 701 Enduro 2016-2025
Husqvarna 701 Supermoto 2016-2025
GAS GAS ES700 2022-2025
GAS GAS SM700 2022-2025
Routine Maintenance Instructions:
- 1. Remove the filter element with a soft brush or cleaner to remove dust adhering to the filter.
- 2. Spray the cleaner evenly on the surface and wait 5-8 minutes.
- 3. Rinse the filter with low-pressure water from the clean side to the dirty side to remove dust and dirt.
- 4. After rinsing, gently shake off the water from the filter or let it air dry.
- 5. Do not use an air gun or hairdryer to dry. Using such methods can damage the original filter material.
- 6. Oil application (use K&N 99-5050): After air drying, apply a thin layer of K&N red oil to the clean filter element (apply to about 30% of the total area; the oil will gradually penetrate the entire surface without dripping). The oil application should be light, thin, and even for maximum effectiveness.
- 7. Reinstall the cleaned and oiled filter element, ensuring screws are tightened securely during installation.
Note: It is recommended to clean the filter every 5,000 kilometers to ensure smooth engine breathing and no delay in power delivery!












