Which accessories make sense for a KTM 690 Enduro R depends on your riding style. When riding off-road, a skid plate protects the exposed engine covers from stone chips. A front brake disc guard reduces the risk of damage from flying stones and other obstacles. Wider footpegs provide more surface area and better grip when riding standing up. NICECNC offers these accessories for selected model years of the KTM 690 Enduro R .

They can be reduced, but not eliminated completely. It’s best to start at the contact points: damped handlebar mounts and isolated foot pegs, followed by a better seat.

For the 690 Enduro R through 2018 (tank approx. 12 L), tests report around 180 to 215 km, with sporty riding tending toward the lower end. From 2019 onward, the tank is larger (approx. 13.5 L), with an expected range of around 250 km [prüfen]. It’s best to plan fuel stops in advance rather than relying on the reserve light. Check the applicable regulations before carrying extra fuel.

The 690 Enduro R has very little room in the cockpit, so you often need an additional handlebar mount. For power, a USB port connected to the onboard battery with a fuse is sufficient; alternator output is limited, so don’t connect too many accessories.  

The standard footpegs are narrow, which causes fatigue on long rides. Wider, slightly lower pegs provide a steadier footing and a more open knee angle. The NICECNC XL footpegs for the KTM 690 Enduro R 2008–2026 sit 20 mm lower and are adjustable. Material.

On dusty trails, a filter gets clogged more quickly, so it should be checked more often than in road use. Reusable filters can be washed and re-oiled; paper filters must be replaced. KTM specifies the service interval in the owner's manual.

During an oil change, metal shavings may appear on the drain plug or in the filter. A magnetic drain plug traps fine iron particles, making unusual wear easier to detect early. A workshop should inspect any unusual amounts.