Plug & Play Off-Road LED Headlight Kit for GASGAS ES SM 700 2023–2024

High-efficiency lighting | Plug-and-play | Designed for off-road use / headlights

Features:

• Precise Fit & Secure Installation
  Developed using 3D scans – ensures an exact fit in the original headlight housing.
• Secure fit with no play.
  Plug-and-play design – no cutting, drilling, or other modifications required. The original structure is preserved while visibility at night is significantly improved.
• Adjustable beam
  The beam alignment can be manually adjusted to suit the riding position, load, and terrain.
• Adjustment: with a 3 mm Allen key
  • Clockwise: raise the beam
  • Counterclockwise: lower the beam
  Increases adaptability at high speeds and on challenging terrain.
• Dual-light-source design for high brightness (combined output)
  Two coaxial light sources are aligned to the same focal point and illuminate simultaneously.
• Brightness:
  • Single mode: approx. 3100 lumens
  • Dual mode: approx. 3600 lumens
  The beam alignment and pattern remain stable, while greater brightness improves illumination at both close and long range.
  ⚠️ Note: Two light sources do NOT mean that you can switch between high and low beams. This product does NOT support high/low beam switching.
• Combined beam pattern: Spot + Flood
  The integrated optical design provides both a focused long-range beam (Spot) and broad surrounding illumination (Flood).
  Improves overall visibility during nighttime off-road rides without requiring you to switch between high and low beams.

⚠️ Usage note:
For off-road use only. Not approved for use on public roads. Please observe applicable local laws and regulations.

LED specifications: (per unit)

• Brand: NICECNC
• Power: 40 W / 50 W
• Brightness: 3100 / 3600 lumens
• Color temperature: 6000 K / 6500 K (similar to natural daylight)
• Chip: High-quality LED chips with stable performance
• Material:
  Housing: Powder-coated cast aluminum + carbon fiber element
  Bracket: Anodized aluminum
  Lens: High-strength optical glass
• Surface finish: Powder-coated, anodized
• Protection rating (waterproofing): IP67
• Operating voltage: 10–30 V DC
• Lifespan: approx. 50,000 hours
• Certification: ECE R10
• Dimensions: See detailed images

Installation:
Plug and play. Ready to use as soon as the cables are connected.

Important notes:

• This product does not have a position light (parking light) function. After installation, the vehicle-side wiring harness for the position light is no longer needed.
• Remove the original position light bulb and insulate the plug or connector with electrical tape or heat-shrink tubing to prevent short circuits, water ingress, or electrical faults.
• You assume all risks resulting from failure to insulate or improper insulation.
  

Fits:

KTM 690 Enduro R 2020–2024
KTM 690 SMC R 2020–2024
GASGAS ES700 2023–2024
GASGAS SM700 2023–2024

Disclaimer:

Nicecnc parts are not sponsored by, endorsed by, or affiliated with the brands they fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, etc.