





NICECNC-DE
Reusable High-Performance Air Filter for KTM 690 Enduro R 2009-2025 SMC R 2012-2024
15 % Rabatt ab 2 Teilen, Code:MX15 Code kopieren
18 % Rabatt ab 3 Teilen, Code:MX18 Code kopieren
Choose options
Give your KTM gas and let it breathe with the high-performance air filter. Unlike OEM filters, our filter maximizes the airflow surface and delivers peak performance for your KTM on every track adventure.
Features:
【Durable Performance】Air filters are durable and represent a better investment for your vehicle. They can last the entire lifespan of the vehicle.
【Improved Performance】Properly maintained air filters can enhance performance and fuel efficiency.
【Reusable Filters】You don’t need to buy new filters every time. Simply clean and re-oil them, and your engine stays in good condition. This saves you money on purchasing new filters.
【Better Filtration/Airflow】Air filters use cotton/oil to ensure better filtration and airflow. Regular cleaning and re-oiling not only improve performance but also provide better engine filtration.
【Fuel Consumption】Improved airflow leads to better fuel consumption. More airflow into the engine reduces fuel consumption and saves you money at the pump.
【Performance Boost】Increases vehicle performance by 1-4%. The filter enhances overall power and torque, although the lower percentage may not be easily noticeable.
【Washable】Easy to maintain. With a filter oil kit and cleaning products, you can easily clean and re-oil the filter, making it cost-effective.
【Extended Engine Life】Air filters have larger pores or gaps between the filter fibers, allowing more air to flow through and cool the engine, thereby extending its lifespan.
【Innovative Design】Uses a layered design of oiled cotton media, providing more airflow compared to traditional paper filters.
【Easy Installation】Air filters are designed to fit easily into the factory airbox, and with the right tools, installation is a breeze.
Package Includes:
1 x High-flow air filter
Fits:
- For Air Filters:
KTM 690 Enduro 2008-2009
KTM 690 Enduro R 2009-2025
KTM 690 SMC 2007-2011
KTM 690 SMC R 2012-2024
Husqvarna 701 Enduro 2016-2025
Husqvarna 701 Supermoto 2016-2025
GAS GAS ES700 2022-2025
GAS GAS SM700 2022-2025
Routine Maintenance Instructions:
- 1. Remove the filter element with a soft brush or cleaner to remove dust adhering to the filter.
- 2. Spray the cleaner evenly on the surface and wait 5-8 minutes.
- 3. Rinse the filter with low-pressure water from the clean side to the dirty side to remove dust and dirt.
- 4. After rinsing, gently shake off the water from the filter or let it air dry.
- 5. Do not use an air gun or hairdryer to dry. Using such methods can damage the original filter material.
- 6. Oil application (use K&N 99-5050): After air drying, apply a thin layer of K&N red oil to the clean filter element (apply to about 30% of the total area; the oil will gradually penetrate the entire surface without dripping). The oil application should be light, thin, and even for maximum effectiveness.
- 7. Reinstall the cleaned and oiled filter element, ensuring the screws are tightened securely during installation.
Note: It is recommended to clean the filter every 5,000 kilometers to ensure smooth engine breathing and no delay in power delivery!












