





NICECNC-DE
Reusable High-Performance Air Filter for Husqvarna 701 Enduro SM 2016-2025
Choose options
Throttle up your KTM and let it breathe with the High-Flow Air Filter. Unlike OEM filters, our filter maximizes airflow surface area, delivering peak performance for your KTM on every track adventure.
Features:
- 【Durable Performance】Air filters are durable and a better investment for your vehicle. They can last for the entire lifespan of the vehicle.
- 【Enhanced Performance】Properly maintained air filters can improve performance and fuel efficiency.
- 【Reusable Filters】No need to buy new filters every time. Just clean and re-oil them, and your engine will remain in good condition, saving you money on buying new filters.
- 【Better Filtration/Airflow】Air filters use cotton/oil to provide better filtration and airflow. Regular cleaning and re-oiling not only enhance performance but also provide better filtration for the engine.
- 【Fuel Economy】Improved airflow results in better fuel economy. More airflow into the engine reduces fuel consumption, saving you money at the pump.
- 【Horsepower Increase】Increases vehicle horsepower by 1-4%. The filter increases overall horsepower and torque, though the smaller percentage may not be easily discernible.
- 【Washable】Easy to maintain. With a filter oil kit and cleaning products, you can easily clean and re-oil the filter, making it cost-effective.
- 【Extended Engine Life】Air filters have larger pores or gaps between filter fibers, allowing more air to pass through and cool the engine, extending its lifespan.
- 【Innovative Design】Uses a layered design of oiled cotton media, which provides more airflow compared to traditional paper filters.
- 【Easy Installation】Air filters are designed to fit effortlessly into the factory airbox, and with the right tools, installation is a breeze.
Package Included:
1 x High Flow Air Filter
Fitment:
- For Air Filter:
KTM 690 Enduro 2008-2009
KTM 690 Enduro R 2009-2025
KTM 690 SMC 2007-2011
KTM 690 SMC R 2012-2024
Husqvarna 701 Enduro 2016-2025
Husqvarna 701 Supermoto 2016-2025
GAS GAS ES700 2022-2025
GAS GAS SM700 2022-2025
Routine Maintenance Instructions:
- 1. Remove the filter element with a soft brush or cleaner to remove dust adhered to the filter.
- 2. Spray the cleaning agent evenly on the surface and wait for 5-8 minutes.
- 3. Rinse the filter with low-pressure water from the clean side to the dirty side to remove dust and dirt.
- 4. After rinsing, gently shake off excess water from the filter or allow it to air dry.
- 5. Do not use an air gun or hairdryer for drying. Using such methods may damage the original material of the filter.
- 6. Oil Pressing (use K&N 99-5050): After air drying, apply a thin layer of K&N red oil to the clean filter element (apply to about 30% of the total area, the oil will gradually penetrate the entire area without dripping). The application of oil should be light, thin, and uniform to achieve maximum effectiveness.
- 7. Reinstall the cleaned and oiled filter element, ensuring the bolts are tightened during installation.
Note: It is recommended to clean the filter every 5,000 kilometers to ensure smooth engine breathing and no delay in power output!












