









NICECNC-DE
Plug & Play LED Rally Headlight Kit for KTM 150-500 EXC/EXC-F/XC-W/XCF-W /XW-F 2024-2027
Choose options
Features:
【Precision fit & secure installation】
*Designed using 3D scanning and modeling technology for an exact fit to the contour of the original headlight housing.
*Secure fit with no looseness or wobble.
*Plug-and-play installation: No cutting, drilling, or modifications to the vehicle structure required. The original appearance is maintained while nighttime visibility is significantly improved.
【Adjustable beam】
The beam alignment can be manually adjusted to suit the seating position, load, and terrain conditions.
Adjustment: Using a 3 mm Allen key
↻Clockwise: Raise the beam
↺Counterclockwise: Lower the beam
Optimizes illumination at high speeds and in demanding terrain.
【Two light sources & high output】
The two light sources are arranged coaxially—they share the same focal point and can operate simultaneously.
Brightness:
Single light source: approx. 3100 lumens
Two light sources: approx. 3600 lumens
The beam alignment and pattern remain stable, while the higher output provides significantly better near- and long-range illumination.
⚠️ Note: Two light sources do NOT mean you can switch between high and low beams.
This product does not have a high/low beam switching function.
【Combined beam pattern: long- and near-range illumination】
The integrated optical design combines focused long-range illumination with broad near-field coverage.
Improves visibility during nighttime off-road riding without requiring switching between high and low beams.
Technical specifications:
Brand: NICECNC
Power: 40 W / 50 W
Brightness: 3100 / 3600 lumens
Color temperature: 6000 K / 6500 K (similar to natural daylight)
LED chip: High-quality LED chip for consistent performance
Material: Powder-coated aluminum housing + carbon fiber bezel
Protection rating: IP67 (waterproof)
Operating voltage: 10–30 V DC
Lifespan: approx. 50,000 hours
Certification: ECE R10
Dimensions: See product images for details
Installation Instructions
1. Removing the stock headlight (OEM)
Use commercially available tools to remove the stock headlight from the vehicle.
2. Installing the new headlight
Secure the kit in the headlight housing and complete installation using the included mounting hardware.
3. Power Connection
*Carefully check the pinout and wire colors of the vehicle-side (OEM) connector. Adjust this kit's wiring accordingly to avoid malfunctions caused by incorrect wiring.
Stock Headlight Wiring (Example: EXC/XCW – OEM wire colors are as follows:)
Pin 1 – Green (GN) – Position/parking light
Pin 2 – Green (GN) – Low beam
Pin 3 – Blue (BU) – High beam (present only on EXC models; not present on XCW models)
Pin 4 – Brown (BR) – Ground (GND)
LED Unit Wire Colors and Connections
- Black wire: Ground (negative terminal) – connect to the brown (BR) OEM ground wire.
- Yellow wire: Power supply for one light source – connect to the green (GN) OEM low-beam wire.
- Red wire: Power supply for the second light source – connect to the blue (BU) OEM high-beam wire.
- Please check connector compatibility before installation. Vehicle models, model years, and trim levels may vary.
Important Notes
1. No position/parking light function: This product does not have a position or parking light function. Please make sure this meets your requirements before purchasing.
2. XC, XC-F, TX, and FX models do not support direct installation because they are not factory-equipped with a headlight or headlight switch.
Installing on these models requires an additional plastic headlight mask and a standard 12V wiring harness.
Please read the relevant notes carefully before purchasing. If additional lighting equipment is installed, make sure the vehicle has sufficient power output and is equipped with a 12 V battery.
3. Off-Road Use Only
This lighting kit is designed exclusively for off-road use and is not intended for use on public roads. Please observe all applicable local laws and regulations.
Package Includes:
1x LED Headlight Kit
Fitment:
KTM 150–500 EXC/EXCF/XCW/XCF-W/XW-F 2024–2027
Disclaimer:
Nicecnc parts are not sponsored, endorsed, or affiliated with the brands they fit, including KTM, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, etc.















