Modular kickback handlebar risers rearward for Harley 1-1/8" fat bar

Features:

• Improved Control – The kickback riser with rear riser reduces the reach by 3.8 cm, providing a more comfortable riding experience and improved control.
• Height Adjustable – Thanks to the modular and removable design, you can customize the riser legs to the desired height. You can raise your handlebars by a total of 21.9 cm (8.25 inches without spacers). This part is a must-have for anyone looking to upgrade their handlebars.
• Compatibility – Fits 28 mm handlebars (1-1/8 inch), with a lower center-to-center distance of 8.9 cm (3.5 inches). Compatible with most Harley models. (Not for Street Glides and motorcycles with batwing fairings, as these require a pull-back plate. We also offer a version for touring motorcycles. Visit our shop.)
• Easy Installation – Simply bolt to the upper triple clamp using the factory screws and bushings for quick and hassle-free installation.

Note:
If you do not need a kickback riser, simply remove the kickback support for standard risers, which raise your handlebars by 15 cm (5 inches without spacers).

Item Specifications:

• Brand: NICECNC
• Condition: New
• Type: Kickback riser for 1-1/8" handlebars
• Material: 6061 Aluminum
• Process: CNC
• Surface Treatment: Anodized
• Raises handlebars by 20 cm (7.25 inches without spacers)
• Brings handlebars 3.8 cm closer to the rider
• Raises handlebars by 15 cm (5 inches without spacers) after removing the kickback support

Package Contents (as pictured):
1 set of modular kickback risers
with mounting screws

Installation Note:

If you use the pullback plate, you CANNOT use your stock ignition switch/steering lock, so you will need to relocate the switch or remove it completely with an optional CVO Ignition Flash, which your local HD dealer can perform. Ask your local shop or dealer for options.
Clamps with 1-1/8" (28 mm) diameter and 3.5" center-to-center spacing
Depending on model and handlebar style, longer cables/brake lines may be required
The lower handlebar clamp has an opening for hidden cables.
Not suitable for use with Springer applications or models with non-removable risers

Recommended for:
Recommended for use with Street Glides and Electra Glides, but can also be used with other Harleys including Road Glides with our modification part.

Fits these models:
Harley Electra Glide Standard FLHT 2010-2023
Harley Electra Glide Ultra Classic FLHTCU 1999-2019
Harley Tri Glide Ultra FLHTCUTG 2016-2023
Harley CVO Tri Glide FLHTCUTGSE 2020-2023
Harley Ultra Limited FLHTK 2014-2023
Harley Ultra Limited Low FLHTKL 2016-2020
Harley CVO Limited FLHTKSE 2014-2021
Harley Electra Glide Police FLHTP 2010-2018
Harley Street Glide FLHX 2006-2023
Harley Street Glide Special FLHXS 2014-2023
Harley Street Glide CVO FLHXSE 2010-2023

Disclaimer:
Parts from Nicecnc Store are not sponsored or endorsed by the brands the parts fit, nor are they affiliated with them, including Harley-Davidson, KTM, Duke, Aprilia, Triumph, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, etc.