Fuel Pump Tester and Transfer Kit for KTM Husqvarna GASGAS

Features:

• The Fuel Transfer Kit is great for transferring gas from one EFI or TPI motorcycle to another when you run out of gas on the trail, for filling your gas bottle when camping, and as a workshop tool for draining fuel tanks before maintenance. Running out of gas is never pleasant, but modern fuel-injected motorcycles don't have a fuel tap to siphon gas from your buddy's bike. Of course, you can stick a piece of fuel line into the tank and suck on it to get enough fuel to gravity-feed into the line. However, this method risks getting gas in your mouth, which is unpleasant.
• The NiceCNC Fuel Transfer Kit (FTK) solves this problem and ensures you don't have an unpleasant taste in your mouth. Using a quick-disconnect piece of fuel line that attaches to your motorcycle's quick disconnect, a simple press of the start button is all it takes to transfer fuel. But do you want to unnecessarily drain the battery and run the starter for minutes just to transfer a few liters of fuel? Transferring one liter takes almost a minute. The FTK kit prevents this problem. It comes with a cable that powers the fuel pump directly from the battery, eliminating the need to crank the starter. Simply plug it into the tank port and quickly connect the cable to the corresponding battery terminals to start pumping.
• Compact and Lightweight Trail Tool – You can also use the kit in the workshop to quickly drain most of the fuel from the motorcycle tank into a fuel can. However, the design is primarily focused on being a compact and lightweight trail tool. The power cable is rolled up as compactly as possible. The same applies to the FTK quick-release fuel line. It consists of a 1-meter long fuel line with a deliberately small diameter of 6 mm to keep the rolled-up line very compact. This allows the entire kit to fit into any bag.
• The fuel line is made of high-quality polyurethane and remains flexible for a long time compared to PVC-fuel lines. The power cable connector is the same AMP Superseal connector as the OEM tank connector.