Replacement end caps with extended volume for nitrogen suspension reservoirs

NICECNC High-Volume Replacement End Caps for Nitrogen Shock Reservoirs
Designed for nitrogen shock reservoirs with a sufficient inner diameter to accommodate an end cap with an outer diameter of 1.73 inches (44 mm).
This is a plug-in design component that requires an appropriate internal clearance for installation.
Please check the internal dimensions of your shock reservoir before purchasing.

Replace the stock end caps with needle valve filling on FOX shocks for UTVs and ATVs (e.g., Polaris, Honda, Yamaha, Can-Am, Kawasaki, Arctic Cat, etc.).

Note: This product is sold by size, not by vehicle model.

Features:

● Easy maintenance and refilling thanks to end caps with Schrader valves.

● Increases the nitrogen volume of the shock reservoir after installation, improving shock performance and reducing the frequency of necessary maintenance.

● More reliable than stock equipment: Original end caps with rubber needle valve filling often leak, which can ultimately cause shock failure.

● Includes O-rings for the valve cap and the reservoir end cap to prevent dirt, debris, mud, and sand from entering the shock.

Product Specifications:
Brand: NICECNC
Material: 6061 aluminum (machined from solid)
Surface finish: Black anodized
End cap outer diameter: 44 mm (1.73 inches)
Sold in pairs

IMPORTANT:
● Please read the description carefully and ensure this end cap fits your UTV shock.

● Our replacement end caps are only suitable for the following shock types:
Your UTV shock must have a “stepped” inner bore in the shock reservoir, with the original reservoir end cap featuring a “ribbed” lip on the edge. There must be no removable internal hex screw (Allen screw). The center of the end cap must have a small opening with a rubber plug inserted.

● If you are unsure about your shock absorber’s dimensions, you can measure the inner diameter of the reservoir (it must accommodate end caps with an outer diameter of 1.73 inches). Feel free to contact us – we are happy to help solve your issue.

Package Contents:
2x End caps for suspension reservoirs (including O-rings)

Fitment
We strongly recommend measuring the inner diameter of your nitrogen reservoir before purchase to ensure there is enough space to fit this end cap (outer diameter: 1.73 inches).

Disclaimer: Parts from Nicecnc Store are not sponsored or endorsed by the brands the parts fit and are not affiliated with them, including Harley-Davidson, KTM, Duke, Aprilia, Triumph, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, etc.