End caps for nitrogen suspension tanks with large volume for UTV shock absorbers

Features:

• Replace the stock needle fill plugs for FOX shock absorbers on UTVs and ATVs such as Polaris, Honda, Yamaha, Can AM, Kawasaki, Arctic Cat, etc.
• Easy maintenance and charging with end plugs with Schrader valve.
• Increase the nitrogen capacity of the reservoir after installation. Provide better shock absorber performance and reduce maintenance frequency.
• They are more reliable than the stock ones. The original rubber needle end plugs for nitrogen fill ports tend to leak, causing your shock absorber to fail.
• Includes O-ring for Schrader valve plug and O-ring for reservoir end plug to prevent dirt, debris, mud, and sand from entering the shock absorber.

Item specifications:

Brand: NICECNC
Material: Billet 6061 billet aluminum
Surface finish: Black anodized
Size: Outer diameter is 57 mm (2.24 inches)
Sold in pairs

NOTE:
Please read the description carefully and make sure this end cap fits your UTV shock absorber.

These end caps fit shock absorber reservoirs with an inner diameter of 2.24 inches (57 mm).

Fits UTV Performance Series shock absorbers with a 2.5-inch reservoir housing

Only the following shock absorbers can be replaced by our shock absorber end caps.
Your UTV shock absorbers have a “stepped” inner reservoir bore and the reservoir end cap has a “ribbed” lip at the end of the cap. There is no removable Allen screw. In the center of the end cap is a small hole with a recessed rubber plug in the middle.

Package includes:
2x spring reservoir end caps with O-rings

Fit:

These end caps fit shock absorber reservoirs with an inner diameter of 2.24 inches (57 mm).

Fits Performance Series FOX shock absorbers or UTV shock absorbers with a 2.5-inch reservoir housing
(such as Polaris, Honda, Yamaha, Can-AM, Kawasaki, Arctic Cat, etc.)

Some models that use the 2.5-inch caps as below
For front and rear shock absorbers
Honda Talon 1000R & (Talon 1000X-4 Live Valve model)
Polaris Ranger XP 1000 Fox Edition XP1000,
Polaris XP1000 Turbo (2 or 4 seats),
Can-Am Maverick X-3, 2 and 4 seats

For rear shock absorbers
Honda Talon1000X-4 (Non-Live Valve)

These also fit other brands and models. If you are unsure about the size of your shock absorbers, you can measure the outside of the reservoir (about 2.6 inches). Just contact us and we will help you solve the problem.

Disclaimer: Parts from Nicecnc Store are not sponsored or supported by the brands to which the parts fit, nor are they affiliated with them, including Harley-Davidson, KTM, Duke, Aprilia, Triumph, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, etc.