{"product_id":"zylinderkopfhaubensatz-fur-ktm-exc-xcw-husqvarna-te-gas-gas-ec-300-2024-2025","title":"Cylinder head cover set for KTM EXC XCW Husqvarna TE Gas Gas EC 300 2024-2025","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eFeatures an upgraded combustion chamber design that provides more power across the entire RPM range and reduces the risk of detonation. It has been designed and tested to run on 91+ octane fuel. The head comes with a complete head gasket kit.\u003c\/li\u003e\n\n\u003cli\u003eCompared to the stock head insert: The initial pre-installation compression is approximately 190 PSI, and after installation, it is approximately 210 PSI (as shown), with a squish clearance of 1.2 mm.\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eMade from 7075 aluminum, which can withstand high pressures and temperatures, so it won't break under pressure.\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eConsistent power gains across the entire RPM range, especially in the low\/mid RPM range. Improved fuel economy:\u003c\/li\u003e\n\n\u003cli\u003eGreatly reduced risk of detonation\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eImproved engine longevity\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eSmoother power delivery\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eDoes not require race fuel\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eItem Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrand: NICECNC\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eCondition: 100% Brand New\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eMaterial: 7075 Aluminum\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eProcessing: CNC-machined\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eCap Surface: Anodized\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer\/Liability Statement:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eThese products are intended for closed-course competition use only.\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eIt is the owner's responsibility to ensure that fueling\/jetting is suitable for local weather and conditions to prevent engine damage.\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eWe are not responsible for any damage, injury, or loss incurred due to the use of these products.\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1x Cylinder Head Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003eFor KTM 300 EXC 2024-2025\u003cbr\u003eFor KTM 300 XCW 2024-2025\u003cbr\u003eFor Husqvarna TE 300 2024-2025\u003cbr\u003eFor GasGas EC 300 2024-2025\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Guide:\u003c\/strong\u003e\u003cbr\u003eDrain coolant and remove stock head.\u003cbr\u003eAdjust deck height using different base gaskets as required. Deck height is the distance from the top of the cylinder to the top of the outside edge of the piston at top dead center (TDC).\u003cbr\u003ePlace the new head O-ring on top of the cylinder, ensuring the locating pin is correctly seated.\u003cbr\u003eInsert the supplied 23 x 2.5 mm O-ring into the groove at the top of the combustion chamber insert. Place the outer \"cap\" part of the head over the insert, taking care not to displace the O-ring. Screw the spark plug into the top of the insert with your fingers. Holding the spark plug, lift the head unit onto the cylinder. Carefully position the head, ensuring the locating pins are aligned and the O-ring remains in place.\u003cbr\u003eTighten the nuts\/bolts in a cross pattern to the required torque as per the owner's manual. Reinstall the head onto the chassis mounting bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eTest Vehicle: 2024 Husqvarna TE300\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eOperating Time: 90 hours\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eRaw Compression: Approx. 190 PSI\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eCompression with NICECNC part: Approx. 210 PSI\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eCompression test data may vary from vehicle to vehicle with different operating times.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNicecnc parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including KTM, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cimg width=\"100% style=\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-300-cylinder-head-cover_4.jpg?v=1733312965\"\u003e\u003cimg width=\"100% style=\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-300-cylinder-head-cover_7.jpg?v=1733312971\"\u003e\u003cimg width=\"100% style=\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-300-cylinder-head-cover_9.jpg?v=1733312970\"\u003e\u003cimg width=\"100% style=\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-300-cylinder-head-cover_11.jpg?v=1733312975\"\u003e\u003cimg width=\"100% style=\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-300-cylinder-head-cover_5.jpg?v=1733312966\"\u003e\u003c\/p\u003e","brand":"NICECNC-DE","offers":[{"title":"Default Title","offer_id":46516138672371,"sku":"1241190901","price":136.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8204\/0819\/files\/ktm-exc-300-cylinder-head-cover__1.jpg?v=1733969857","url":"https:\/\/de.nicecnc.com\/en\/products\/zylinderkopfhaubensatz-fur-ktm-exc-xcw-husqvarna-te-gas-gas-ec-300-2024-2025","provider":"NICECNC-DE","version":"1.0","type":"link"}